PRODUCTS 
Ingersoll Rand Tools

 

Ingersoll Rand
Angle Grinders  

Carbide Burr / Mounted Wheel: Revolution Series | G1-Series | G2-Series | G3-Series | Type 1 Wheel: G1-Series |
Type 27 & 28 Wheels G1-Series | M2-Series | G3-Series

 

The Angle air grinders are designed for material removal using carbide burr/mounted wheels, Type 1 wheels, or Type 27 and 28 depressed center wheels. For consistent quality and performance, Angle Air Grinders are great for removing parting lines, fins and small risers from casting, and smoothing and blending welded areas.

Angle Grinders with a collet are ideal for weld grinding and blending, light deburring and finishing, and light to medium pressure grinding for use on contours or flat surfaces

You can also configure your tool for a Type 1 wheel for cutting or grinding, or use the Type 27 & 28 depressed center wheel for heavy grinding.

Choose tools with enough horsepower to drive the abrasive material you are using, and allow the grinder’s speed to work for you. Only use recommended equipment and adaptors. Inspect grinding wheels closely for any imperfections, damage or broken edges. Use correct size guards, flanges, blotters, spindles and mounting practices to ensure operator safety.

 

Ingersoll Rand    Angle Grinders     Carbide Burr / Mounted Wheel

IR Angle Grinders

 

Revolution Series Die Grinders
Carbide Burr / Mounted Wheel  


Revolution Series Angle Die Grinders feature a powerful 0.33 hp (0.25 kW) to 0.40 hp (0.30 kW) motor that delivers plenty of strength in speeds from 12,000 rpm to 20,000 rpm. Offering the torque and muscle required for a wide range of applications ranging from automotive to assembly to shipbuilding. Weighing just over 1 lb. (0.45 kg), the Revolution Series Angle Die Grinders require minimal effort and provide maximum operator comfort.


    Features
  • Composite grip over rugged aluminum housing reduces vibration and noise.
  • 3 = Tool Series Designation
    25 = RPM (12,000 - 35,000)
    S = Type (S - straight, A - angle, X - extended)
    C = Spindle Type (C - collet)
    4 = Collet Size (1/4" or 6mm collet)
  • Wrap - around exhaust ports direct air away from work and operator.
  • Integral lever safety lock protects against inadvertant start-ups.

 

Ingersoll Rand    Angle Grinders     Carbide Burr / Mounted Wheel

IR Angle Grinders

 

G1-Series 0.40 hp
Carbide Burr / Mounted Wheel  

 

At 0.40 hp (0.30 kW), the G1-Series packs a lot of power in a small package. Ideal for light material removal, cleaning rough castings, deburring parts, cleaning up welds, and other finishing tasks. The G1-Series also features low noise and vibration levels and one-nut access for all motor servicing.


    Features
  • Improved efficiency means big power in a small package
  • Ergonomic D-shaped handle for operator comfort
  • Laser-etched product information won’’t wear off
  • G2 = Power hp (G1- 0.4 , G2- 0.8 , G3- 1.35)
    A = Model Config. (A- Angle Grinder, E- Ext. Angle Grinder Small, L- Ext. Angle Grinder Large, H- Horizontal Grinder, X- Ext. Horizontal Grinder, XX- Double Bearing Ext. Horizontal Grinder, S- 2” Extension Horizontal Grinder)
    120 = Free Speed (12,000 rpm)
    R = Exhaust Direction (R - rear, F - front, P - piped away)
    P = Output Type (P - Type 27, H - Type 1, G - Collet Tools, S - Sander Arbor)
    10 = Output Size -Type 27 Tools (6 - 3/8”-24 thread arbor English, 7 - 3/8”-24 thread arbor Metric [for 100mm, 125mm, or 150mm x 22.2mm], or 10 - 5/8”-11 thread arbor English,) Type 1 Tools (6 - 3/8"-24 thread arbor English) Collet Tools (4 - 1/4" collet) Sanders (4 - 1/4"-20 thread, 418 - 1/4" x 18" , 812 - 1/2" x 12", 818 - 1/2" x 18")
    45 = Guard Sizes (3- 3” guard, 4- 4” guard, 45- 4.5” guard, 5- 5” guard, 6- 6” guard)
  • Dual exhaust capabilities
  • Ergonomic low-profile locking throttle lever for operator safety
  • Composite housing prevent cold feel for operator comfort
  • Easy to service one nut removal for motor repair
  •  

Ingersoll Rand    Angle Grinders     Carbide Burr / Mounted Wheel

IR Angle Grinders

 

G2-Series 0.80 hp
Carbide Burr / Mounted Wheel  

 

Perfect for big jobs, the G2-Series performs at an impressive 0.80 hp (0.60 kW). The G2-Series also features low noise and vibration levels and one-nut access for all motor servicing.


    Features
  • Suited for heavier-duty grinding, cutting, cleaning, and polishing applications
  • Ergonomic D-shaped handle for operator comfort
  • Laser-etched product information won’’t wear off
  • G2 = Power hp (G1- 0.4 , G2- 0.8 , G3- 1.35)
    A = Model Config. (A- Angle Grinder, E- Ext. Angle Grinder Small, L- Ext. Angle Grinder Large, H- Horrizontal No Nxtension, X- Extended Hor. Grinder, XX- Double Bearing Ext. Horr., S- 2” Extension )
    120 = Free Speed (12,000 rpm)
    R = Exhaust Direction (R - rear, F - front, P - piped away)
    P = Output Type (P - Type 27, H - Type 1, G - Collet Tools, S - Sander Arbor)
    10 = Output Size -Type 27 Tools (6 - 3/8”-24 thread arbor English, 7 - 3/8”-24 thread arbor Metric [for 100mm, 125mm, or 150mm x 22.2mm], or 10 - 5/8”-11 thread arbor English,) Type 1 Tools (6 - 3/8"-24 thread arbor English) Collet Tools (4 - 1/4" collet) Sanders (4 - 1/4"-20 thread, 418 - 1/4" x 18" , 812 - 1/2" x 12", 818 - 1/2" x 18")
    45 = Guard Sizes (3- 3” guard, 4- 4” guard, 45- 4.5” guard, 5- 5” guard, 6- 6” guard)
  • Dual exhaust capabilities
  • Ergonomic low-profile locking throttle lever for operator safety
  • Composite housing prevent cold feel for operator comfort
  • Easy to service one nut removal for motor repair

 

Ingersoll Rand    Angle Grinders     Carbide Burr / Mounted Wheel

IR Angle Grinders

 

G3-Series 1.35 hp
Carbide Burr / Mounted Wheel  

 

When the biggest job demands the most power use the G3-Series performing at an impressive 1.35 hp (1.0 kW). The G3-Series features an internal contamination-free air controller to maintain tool speed and maximize material removal rates. Ideal for industrial-duty material removal, an ergonomic D-shaped handle fits better in your hand with low noise and vibration.


    Features
  • Internal contamination-free air controller helps maintain tool speed to maximize material removal rate
  • Ideal for industrial-duty material removal with burs, grinding wheels and coated abrasives
  • Ergonomic D-Shaped handle fits better in the operator's hand
  • One-nut access for all motor servicing
  • Vibration reduced handle, decrease vibration by over 70%, allowing end user extended operation
  • G2 = Power hp (G1- 0.4 , G2- 0.8 , G3- 1.35)
    A = Model Config. (A- Angle Grinder, E- Ext. Angle Grinder Small, L- Ext. Angle Grinder Large, H- Horrizontal No Nxtension, X- Extended Hor. Grinder, XX- Double Bearing Ext. Horr., S- 2” Extension )
    120 = Free Speed (12,000 rpm)
    R = Exhaust Direction (R - rear, F - front, P - piped away)
    P = Output Type (P - Type 27, H - Type 1, G - Collet Tools, S - Sander Arbor)
    10 = Output Size -Type 27 Tools (6 - 3/8”-24 thread arbor English, 7 - 3/8”-24 thread arbor Metric [for 100mm, 125mm, or 150mm x 22.2mm], or 10 - 5/8”-11 thread arbor English,) Type 1 Tools (6 - 3/8"-24 thread arbor English) Collet Tools (4 - 1/4" collet) Sanders (4 - 1/4"-20 thread, 418 - 1/4" x 18" , 812 - 1/2" x 12", 818 - 1/2" x 18")
    45 = Guard Sizes (3- 3” guard, 4- 4” guard, 45- 4.5” guard, 5- 5” guard, 6- 6” guard)

 

Ingersoll Rand    Angle Grinders     Type 1 Wheel

IR Angle Grinders

 

G1-Series 0.40 hp
Type 1 Wheel  

 

At 0.40 hp (0.30 kW), the G1-Series packs a lot of power in a small package. Ideal for light material removal, cleaning rough castings, deburring parts, cleaning up welds, and other finishing tasks. The G1-Series also features low noise and vibration levels and one-nut access for all motor servicing.


    Features
  • Improved efficiency means big power in a small package
  • Ergonomic D-shaped handle for operator comfort
  • Laser-etched product information won’t wear off
  • G2 = Power hp (G1- 0.4 , G2- 0.8 , G3- 1.35)
    >A = Model Config. (A- Angle Grinder, E- Ext. Angle Grinder Small, L- Ext. Angle Grinder Large, H- Horizontal Grinder, X- Ext. Horizontal Grinder, XX- Double Bearing Ext. Horizontal Grinder, S- 2” Extension Horizontal Grinder)
    120 = Free Speed (12,000 rpm)
    R = Exhaust Direction (R - rear, F - front, P - piped away)
    P = Output Type (P - Type 27, H - Type 1, G - Collet Tools, S - Sander Arbor)
    10 = Output Size -Type 27 Tools (6 - 3/8”-24 thread arbor English, 7 - 3/8”-24 thread arbor Metric [for 100mm, 125mm, or 150mm x 22.2mm], or 10 - 5/8”-11 thread arbor English,) Type 1 Tools (6 - 3/8"-24 thread arbor English) Collet Tools (4 - 1/4" collet) Sanders (4 - 1/4"-20 thread, 418 - 1/4" x 18" , 812 - 1/2" x 12", 818 - 1/2" x 18")
    45 = Guard Sizes (3- 3” guard, 4- 4” guard, 45- 4.5” guard, 5- 5” guard, 6- 6” guard)
  • Dual exhaust capabilities
  • Ergonomic low-profile locking throttle lever for operator safety
  • Composite housing prevent cold feel for operator comfort
  • Easy to service one nut removal for motor repair

 

Ingersoll Rand    Angle Grinders     Type 27 & 28 Wheels

IR Angle Grinders

 

G1-Series 0.40 hp
Type 27 & 28 Wheels  

 

At 0.40 hp (0.30 kW), the G1-Series packs a lot of power in a small package. Ideal for light material removal, cleaning rough castings, deburring parts, cleaning up welds, and other finishing tasks. The G1-Series also features low noise and vibration levels and one-nut access for all motor servicing.


    Features
  • Improved efficiency means big power in a small package
  • Ergonomic D-shaped handle for operator comfort
  • Laser-etched product information won’’t wear off
  • G2 = Power hp (G1- 0.4 , G2- 0.8 , G3- 1.35)
    A = Model Config. (A- Angle Grinder, E- Ext. Angle Grinder Small, L- Ext. Angle Grinder Large, H- Horizontal Grinder, X- Ext. Horizontal Grinder, XX- Double Bearing Ext. Horizontal Grinder, S- 2” Extension Horizontal Grinder)
    120 = Free Speed (12,000 rpm)
    R = Exhaust Direction (R - rear, F - front, P - piped away)
    P = Output Type (P - Type 27, H - Type 1, G - Collet Tools, S - Sander Arbor)
    10 = Output Size -Type 27 Tools (6 - 3/8”-24 thread arbor English, 7 - 3/8”-24 thread arbor Metric [for 100mm, 125mm, or 150mm x 22.2mm], or 10 - 5/8”-11 thread arbor English,) Type 1 Tools (6 - 3/8"-24 thread arbor English) Collet Tools (4 - 1/4" collet) Sanders (4 - 1/4"-20 thread, 418 - 1/4" x 18" , 812 - 1/2" x 12", 818 - 1/2" x 18")
    45 = Guard Sizes (3- 3” guard, 4- 4” guard, 45- 4.5” guard, 5- 5” guard, 6- 6” guard)
  • Ergonomic low-profile locking throttle lever for operator safety
  • Composite housing prevent cold feel for operator comfort
  • Easy to service one nut removal for motor repair
  • Wheel guard, flanges and nut Spindle and wheel nut wrenches
  • Dual exhaust capabilities

 

Ingersoll Rand    Angle Grinders     Type 27 & 28 Wheels

IR Angle Grinders

 

M2-Series 1.00 hp
Type 27 & 28 Wheels  

 

Get fast material removal from a powerful tool that does more, is easier to use, and needs less maintenance. All-new M2-Series angle grinders feature more-powerful, lube-free motors and are available in various speeds and configurations to match virtually any job.


    Features
    Superior Motor
  • Lube-free for reduced maintenance
  • Speed governed to maximize productivity, efficiency and life of abrasives
  • Compact and powerful 1-hp motor for faster material removal
    Superior Ease of Use
  • Spindle Lock allows faster, easier accessory changes
  • Multi-positional guard easily adjusts to four different positions without tools
  • Low-profile throttle lever for increased comfort
    • Match Your Application
    • Available in multiple guard sizes for wider accessory compatibility
    • Multiple speeds available so you can pick the right M2- Series tool for the job
      Superior Construction
    • Steel housing for superior durability
    • Ergonomic handle design for enhanced operator comfort, to reduce fatigue, and to improve productivity

     

Ingersoll Rand    Angle Grinders     Type 27 & 28 Wheels

IR Angle Grinders

 

G3-Series 1.35 hp
Type 27 & 28 Wheels  

 

With its superior power-to-weight ratio, delivering a mighty 1.35 hp (1.0 kW), the G3-Series is made to tackle the biggest jobs demanding the most power. Featuring an internal contamination-free air controller that helps maximize material removal rates, it is ideal for industrial-duty material removal with grinding wheels and coated abrasives.


    Features
  • Ergonomic D-shaped handle for operator comfort
  • Laser-etched product information won’’t wear off
  • G2 = Power hp (G1- 0.4 , G2- 0.8 , G3- 1.35)
    A = Model Config. (A- Angle Grinder, E- Ext. Angle Grinder Small, L- Ext. Angle Grinder Large, H- Horizontal Grinder, X- Ext. Horizontal Grinder, XX- Double Bearing Ext. Horizontal Grinder, S- 2” Extension Horizontal Grinder)
    120 = Free Speed (12,000 rpm)
    R = Exhaust Direction (R - rear, F - front, P - piped away)
    P = Output Type (P - Type 27, H - Type 1, G - Collet Tools, S - Sander Arbor)
    10 = Output Size -Type 27 Tools (6 - 3/8”-24 thread arbor English, 7 - 3/8”-24 thread arbor Metric [for 100mm, 125mm, or 150mm x 22.2mm], or 10 - 5/8”-11 thread arbor English,) Type 1 Tools (6 - 3/8"-24 thread arbor English) Collet Tools (4 - 1/4" collet) Sanders (4 - 1/4"-20 thread, 418 - 1/4" x 18" , 812 - 1/2" x 12", 818 - 1/2" x 18")
    45 = Guard Sizes (3- 3” guard, 4- 4” guard, 45- 4.5” guard, 5- 5” guard, 6- 6” guard)
  • Big Power in a small package
  • Ergonomic low-profile locking throttle lever for operator safety
  • Contamination-free controller helps maintain tools speed to maximize material removal
  • Composite housing prevent cold feel for operator comfort
  • Easy to service one nut removal for motor repair
  • Wheel guard, flanges and nut Spindle and wheel nut wrenches