PRODUCTS 
Ingersoll Rand Tools

 

Ingersoll Rand
Straight Grinders  

Revolution Series Die Grinder | G1-Series 0.40 hp | M2-Series 1.00 hp | G2-Series 0.80 hp | G3-Series 1.35 hp

 

The Straight air grinders are designed for material removal using a carbide burr, mounted wheel, mounted cone, or Type 1 wheels. For consistent and quality performance, Straight Grinders are great for removing parting lines, fins and small risers from castings, smoothing and blending welded areas, and cutting through and removing material as required.


Choose tools with enough horsepower to drive the abrasive material you are using, and allow the grinder’s speed to work for you. Only use recommended equipment and adaptors. Inspect grinding wheels closely for any imperfections, damage or broken edges. Use correct size guards, flanges, blotters, spindles and mounting practices to ensure operator safety.


Ingersoll Rand   Straight Grinders     Carbide Burr / Mounted Wheel

IR Straight Grinders

 

Revolution Series Die Grinder
Carbide Burr / Mounted Wheel  

 

The Revolution Series Straight Die Grinder features a powerful 0.33 hp (0.25 kW) to 0.40 hp (0.30 kW) motor that delivers plenty of strength in speeds from 25,000 rpm to 35,000 rpm. Offering the torque and muscle required for a wide range of applications ranging from automotive to assembly to shipbuilding. Weighing less than 1 lb. (0.45 kg), Revolution Series Straight Die Grinders require minimal effort and provide maximum operator comfort.


Features

  • Composite grip over rugged aluminum housing reduces vibration and noise.
  • 3 = Tool Series Designation
    25 = RPM (12,000 - 35,000)
    S = Type (S - Straight, A - Angle, E - Extended)
    C = Spindle Type (C - Collet)
    4 = Collet Size (1/4" or 6mm collet)
  • Wrap - around rear exhaust ports direct air away from work and operator.
  • Integral lever safety lock protects against inadvertant start-ups.
  •  

    Ingersoll Rand   Straight Grinders     Carbide Burr / Mounted Wheel

    IR Straight Grinders

     

    G1-Series 0.40 hp
    Carbide Burr / Mounted Wheel  

     

    Perfect for bigger jobs, the G2-Series performs at an even more impressive 0.80 hp (0.60 kW). The G2-Series also features low noise and vibration levels, one-nut access for all motor servicing.


      Features
    • G2 = Power hp (G1- 0.4 , G2- 0.8 , G3- 1.35)
      A = Model Config. (A- Angle Grinder, E- Ext. Angle Grinder Small, L- Ext. Angle Grinder Large,
      H- Horizontal No Nxtension, X- Extended Hor. Grinder, XX- Double Bearing Ext. Horr., S- 2” Extension )
      180 = Free Speed (18,000 rpm)
      R = Exhaust Direction (R- rear, F- front, P- piped away)
      P = Output Type (P- Type 27, Type 1, Collet Tools, Sander Arbor)
      10 = Output Size -Type 27 Tools (5- 3/8” arbor Metric[for 80mmx10mm], 6- 3/8” arbor English, 7- 3/8” arbor
      Metric[for 100mm, 125mm, or 150mm x 22.2mm], or 10- 5/8”)
      45 = Guard Sizes (3- 3” guard, 4- 4” guard, 45- 4.5” guard, 5- 5” guard, 6- 6” guard)
    • Laser-etched product information won’’t wear off

     

    Ingersoll Rand   Straight Grinders     Carbide Burr / Mounted Wheel

    IR Straight Grinders

     

    M2-Series 1.00 hp
    Carbide Burr / Mounted Wheel  

     

    All-new M2-Series straight grinders offer power and versatility with low maintenance requirements. Available in different speeds to match different jobs, M2-Series straight grinders are easy-to-use, long-lasting tools that work harder for you.


    Features & Benefits


      Superior Motor
    • Lube-free for reduced maintenance
    • Speed governed to maximize productivity, efficiency and life of abrasives
    • Compact and powerful 1-hp motor for faster material removal
      Superior Ease of Use
    • Ergonomic handle design for enhanced operator comfort, to reduce fatigue, and to improve productivity
    • Low-profile throttle lever for increased comfort
      Match Your Application
    • Speeds available from 18,000 rpm to 25,000 rpm
    • Multiple speeds available so you can pick the right M2- Series tool for the job
      Superior Construction
    • Steel housing for superior durability

     

    Ingersoll Rand   Straight Grinders     Carbide Burr / Mounted Wheel

    IR Straight Grinders

     

    G2-Series 0.80 hp
    Carbide Burr / Mounted Wheel  

     

    Perfect for bigger jobs, the G2-Series performs at an even more impressive 0.80 hp (0.60 kW). The G2-Series also features low noise and vibration levels, one-nut access for all motor servicing.

     

      Features
    • Suited for heavier-duty grinding, cutting, cleaning, and polishing applications
    • Ergonomic D-shaped handle for operator comfort
    • Laser-etched product information won’’t wear off
    • G2 = Power hp (G1- 0.4 , G2- 0.8 , G3- 1.35)
      A = Model Config. (A- Angle Grinder, E- Ext. Angle Grinder Small, L- Ext. Angle Grinder Large,
      H- Horrizontal No Nxtension, X- Extended Hor. Grinder, XX- Double Bearing Ext. Horr., S- 2” Extension )
      120 = Free Speed (12,000 rpm)
      R = Exhaust Direction (R - rear, F - front, P - piped away)
      P = Output Type (P - Type 27, H - Type 1, G - Collet Tools, S - Sander Arbor)
      10 = Output Size -Type 27 Tools (6 - 3/8”-24 thread arbor English, 7 - 3/8”-24 thread arbor
      Metric [for 100mm, 125mm, or 150mm x 22.2mm], or 10 - 5/8”-11 thread arbor English,)
      Type 1 Tools (6 - 3/8"-24 thread arbor English) Collet Tools (4 - 1/4" collet)
      Sanders (4 - 1/4"-20 thread, 418 - 1/4" x 18" , 812 - 1/2" x 12", 818 - 1/2" x 18")

    Ingersoll Rand   Straight Grinders     Carbide Burr / Mounted Wheel

    IR Straight Grinders

     

    G3-Series 1.35 hp
    Carbide Burr / Mounted Wheel  

     

    When the biggest job demands the most power use the G3-Series performing at an impressive 1.35 hp (1.0 kW). The G3-Series features an internal, contamination-free air controller to maintain tool speed and maximize material removal rates. Ideal for industrial-duty material removal, an ergonomic D-shaped handle fits better in your hand with low noise and vibration.

     

      Features
    • Internal contamination-free air controller helps maintain tool speed to maximize material removal rate
    • Ideal for industrial-duty material removal with burrs, grinding wheels and coated abrasives
    • One-nut access for all motor servicing
    • Ergonomic D-Shaped handle fits better in the operator's hand
    • G2 = Power hp (G1- 0.4 , G2- 0.8 , G3- 1.35)
      A = Model Config. (A- Angle Grinder, E- Ext. Angle Grinder Small, L- Ext. Angle Grinder Large, H- Horrizontal No Nxtension,
      X- Extended Hor. Grinder, XX- Double Bearing Ext. Horr., S- 2” Extension )
      120 = Free Speed (12,000 rpm)
      R = Exhaust Direction (R - rear, F - front, P - piped away)
      P = Output Type (P - Type 27, H - Type 1, G - Collet Tools, S - Sander Arbor)
      10 = Output Size -Type 27 Tools (6 - 3/8”-24 thread arbor English, 7 - 3/8”-24 thread arbor Metric [for 100mm, 125mm, or 150mm x 22.2mm],
      or 10 - 5/8”-11 thread arbor English,) Type 1 Tools (6 - 3/8"-24 thread arbor English) Collet Tools (4 - 1/4" collet)
      Sanders (4 - 1/4"-20 thread, 418 - 1/4" x 18" , 812 - 1/2" x 12", 818 - 1/2" x 18")
      45 = Guard Sizes (3- 3” guard, 4- 4” guard, 45- 4.5” guard, 5- 5” guard, 6- 6” guard)