Ingersoll Rand Tools


Ingersoll Rand
Angle Belt Sanders  

G1-Series 0.40 hp (0.3 kW)


The G1-Series angle belt sanders have been developed as part of the G-Series finishing tools line for specific uses in surface preparation and final finishing applications. The angle belt sanders are based on the G1 – Series, 0.40 hp (0.30 kW) tools with a variety of speed offering and belts for sanding, blending and smoothing operations. The G1-Series models are multi-purpose tools used in aerospace, shipbuilding, utilities, woodworking and furniture production, vehicle and marine assembly and general maintenance.

The G1-Series tools feature the one nut, “drop-in” motor, which requires no alignment or shims. Vanes can be removed and quickly replaced. This innovative design reduces the expense of down-time, repair and replacement parts.

Your selection and purchase of finishing tools has a direct effect on process and product quality. Your decision can make a difference in finishing efficiency and in the improved quality and durability of finishes. Choose tools with enough horsepower to drive the abrasive material you are using, and allow the tool's speed to work for you. Only use recommended equipment and adaptors. Use correct size guards, flanges, blotters, spindles and mounting practices to ensure operator safety.


Ingersoll Rand   Angle Belt Sanders    

IR Angle Belt Sander


G1-Series 0.40 hp (0.3 kW)


At 0.40 hp (0.3kW), the G1-Series packs a lot of power in a small package. Ideal for light material removal, cleaning rough castings, deburring parts, cleaning up welds, and other finishing tasks. The G1-Series also features low noise and vibration levels and one-nut access for all motor servicing.


  • G2 = Power hp (G1- 0.4 , G2- 0.8 , G3- 1.35)
    A = Model Config. (A- Angle Grinder, E- Ext. Angle Grinder Small, L- Ext. Angle Grinder Large, H- Horrizontal No Nxtension, X- Extended Hor. Grinder, XX- Double Bearing Ext. Horr., S- 2” Extension)
    180 = Free Speed (18,000 rpm)
    R = Exhaust Direction (R- rear, F- front, P- piped away)
    P = Output Type (P- Type 27, Type 1, Collet Tools, Sander Arbor)
    10 = Output Size -Type 27 Tools (5- 3/8” arbor Metric[for 80mmx10mm], 6- 3/8” arbor English, 7- 3/8” arbor
    Metric [for 100mm, 125mm, or 150mm x 22.2mm], or 10- 5/8”)
    45 = Guard Sizes (3- 3” guard, 4- 4” guard, 45- 4.5” guard, 5- 5” guard, 6- 6” guard)
  • Improved efficiency means big power in a small package
  • Laser-etched product information won’’t wear off