FasTest PRODUCTS  
Leak Testing and Calibration

 

Leak Testing
and Calibration


John Henry Foster Company is your place for FasTest's leak and pressure testing connectors. FasTest connectors improve manufacturing costs and efficiencies with quick, temporary connections to seal a wide variety of tubes, holes, thread profiles and test piece features.

  • Eliminate bottlenecks in high volume testing applications
  • Simple operation does not require wrenches, tape or sealants
  • Eliminate damage to test pieces realized with traditional methods

Contact us today for solutions that will enhance your energy efficiency, productivity and operations.


 

  

FasTest Twistmate® Connectors
 
Twistmate connectors and plugs provide fast leak tight threaded connections for testing, filling, flushing, plugging, calibrating or venting applications. Spin Twistmate fingertight onto thread until face seal contacts test piece. The seal is automatic as air, gas, or hydraulic pressure from the system provides a sealing force against the face of the threads.
 
  • National Pipe Thread, NPT
    – Male Plug, Male Connector, Male Swivel Connector
    Connects to internal threads
    – Female Connector
    Connects to external threads
FasTest Twistmate connectors

 

  

FasTest FI Series Internal Connectors
 
Automated Internal Sealing to 120 psi.
FasTest FI Internal Connector provides fast, leak free connections for pressure and vacuum testing, fluid filling and flushing. The connectors are activated by compressed regulated air acting on a piston which expands an elastomeric seal to form a leak-tight connection. Testing, filling or flushing of the piece is accomplished by introducing air, liquid or gas media through the FasTest FI Connector.
 
  • FI Series
    – FI Connector, FIS Seal Set, FB Bulk Seals
FasTest FI Series Internal Connector

 

  

FasTest FE Series External Connectors
 
Automated External Sealing to 500 psi.
FasTest FE External Connector seal conventional and non-standard surfaces and connects to any tube or pipe, smooth or threaded. Compressed air activates the elastomeric seals for a full-flow test to 500 psi with air, gas, or liquid. Uniform seal movement makes a virtually leak-proof connection, even over threaded, rough and oily surfaces. Testing, filling or flushing of the test piece is accomplished by introducing media through the FasTest connector.
 
  • FE Series
    – FE Connector, FES Seal Set, FEB Bulk Seals
FasTest FE Series External Connector

 

  

FasTest Pilot Pressure Booster
 
Used with FE Connectors for sealing
FasTest FI Internal Connector provides fast, leak free connections for pressure and vacuum testing, fluid filling and flushing. The connectors are activated by compressed regulated air acting on a piston which expands an elastomeric seal to form a leak-tight connection.

Production testing of threads and hard to seal surfaces can be automated using the sealing system of a PB-1015 Pilot Pressure Booster and a proper sized urethane seal set in a FE Connector.
 
  • Pilot Pressure Booster
    – Accessory Kits
FasTest Pilot Pressure Booster

 

  

FasTest FasMate Connectors
 
Instant Connections to Internal and External Threads
The FasMate Series of lever, thumb valve and pneumatically actuated connectors are an ideal method for fast, safe and repeatable connections. The lever, thumb valve or pneumatic operation deliver an instant threaded leak tight and high pressure test connection.
 
  • FasMate Series
    – Positive Clamp
FasTest FasMate Connector