John Henry Foster’s On-site Retail Store

Enter Drive Speed, Drive Sprocket Diameter and Driven Sprocket Diameter to calculate Driven Speed

Enter Gear Outside Diameter, Gear Width and Gear Center Distance to calculate Gallons Per Minute (GPM) @ 1200 RPM.

Enter the Cylinder Bore diameter, PSI, Rod Diameter and Angle to calculate PUSH/PULL for a hydraulic cylinder mounted at an angle

Enter Drive Speed, Drive Sprocket Diameter and Driven Speed to calculate Driven Sprocket Diameter

Enter the Cylinder Bore diameter, PSI and Rod Diameter to calculate PUSH/PULL for a hydraulic cylinder

Enter Pulley Center Distance, Large Pulley Diameter and Other Pulley Diameter to calculate V-Belt Length

Enter Drive Sprocket Diameter, Driven Speed and Driven Sprocket Diameter to calculate Drive Speed

Enter the Wheel Outside Diameter (not the rim size) and Axle RPM to calculate Vehicle Speed

Enter the Reservoir Diameter and Length or Height to calculate Cylindrical Tank Capacity in cubic inches/gallons

Enter the GPM and PSI (pressure) to calculate Horsepower

Enter the Reservoir Length, Width and Height to calculate Rectangular Tank Capacity in cubic inches/gallons

Enter the Pump GPM, Cylinder Bore diameter, Stroke and Rod Diameter to calculate Cylinder Speed (Do not use fractions)

Calculate Input/Exhaust Volumes to match the exhaust volume from one cylinder to the input volume of the next cylinder in a series